Skip to content

Offshore HSE installation practice

Vessel operators and company safety leads arranging an offshore install.

How offshore Starlink work is planned around permits, a pre-mobilisation survey, and a minimum crew.

Starlink high-performance terminal on a naval vessel, from the published installation library

Overview

Plan for the actual environment

Offshore work is planned as a safety job as well as a connectivity job. The public HSE page describes permit-to-work compliance, a survey before mobilisation, a two-person minimum, and marine-rated hardware. The stated sequence is a remote survey, a permit and safety briefing, installation, activation with a speed baseline, and handover documents. Those steps describe the practice. They are not a claim that Skylink holds a particular offshore certification.

Local mounting, access, and weather notes are published for confirmed service areas across Nigeria.

Fit and scope

Who this is for

  • Offshore vessels with a permit-to-work system
  • Sites that require a written survey before a crew travels

What the service covers

  • Remote survey before mobilisation
  • Work planned around the site's permit-to-work process
  • Installation by at least two people where that rule applies
  • Activation check and handover notes

Requirements and boundaries

What we typically need from you

  • The site's safety rules and permit process
  • A point of contact for mobilisation

Important limits

  • We follow the operator's safety system; we do not replace it
  • No classification society approval is claimed on this page
  • Weather and operator schedules control when a crew can board

How it usually works

The final sequence is agreed around the site, access, equipment, and service scope.

  1. 1

    Remote survey of the mounting and power situation

  2. 2

    Permit-to-work and briefing on site

  3. 3

    Install, activate, record a baseline, and hand over

  • Maritime and offshore

    Starlink connectivity planning and installation support for vessels and offshore sites, with scope agreed per job.

    View service
  • Boat and houseboat installation

    Flat high-performance mounting, cable routes, and power planning for boats and houseboats.

    View service
  • Enterprise and marine hub deployments

    A deeper install path for offices, NGOs, vessels, and industrial camps that need documentation as well as a dish.

    View service
  • Marine SD-WAN integration

    Combining Starlink with LTE, VSAT, or a second dish, plus VLAN and traffic priority on the vessel network.

    View service
  • Fleet connectivity

    Planning Starlink across more than one vessel or vehicle, with each hull scoped on its own.

    View service

Related products

Questions about this service

Do you issue offshore safety certificates?

No. The work is carried out inside the operator's permit system. This page does not claim an independent certification.

Contact Skylink about a marine project

Contact Skylink with the location, equipment, and requirement for offshore hse installation practice. Online form submission remains unavailable until delivery is configured.

Opens a guide that answers from published Skylink pages. It is not a live generative model.