Skip to content

Backup power

Homes and sites with frequent outages that need connectivity to continue.

Plan UPS, inverter, or generator coordination so your Starlink connection stays usable during grid outages.

Starlink Gen 3 dish beside a portable power station on a vehicle bed, illustrating backup power for the kit

Overview

Plan for the actual environment

In much of Nigeria the question is not whether the power will drop but how often. A Starlink dish and router need steady power to stay online, and a sudden cut followed by a restart can interrupt calls, payments, and remote work. This service helps you decide how the Starlink equipment should be powered when mains fails: through a UPS, an inverter system, a generator with changeover, or a mix. We look at what the equipment draws, what else shares the circuit, and how long you need it to stay up, then coordinate the install with your electrician or ours where agreed. We do not name a single brand as the answer, and we do not promise runtimes before we know your battery, load, and conditions.

Local mounting, access, and weather notes are published for confirmed service areas across Nigeria.

Fit and scope

Who this is for

  • Homes that rely on generators and want a smooth hand-off when power switches
  • Offices that need the link up during short outages
  • Sites that already have an inverter or solar set-up and want Starlink included
  • Remote locations where power is unstable and the Starlink link is essential

What the service covers

  • Discussion of what must stay online and for roughly how long
  • Review of existing UPS, inverter, battery, or generator arrangements
  • Guidance on connecting the Starlink power supply and router to a protected circuit
  • Coordination with the electrician or power installer during the Starlink install

Requirements and boundaries

What we typically need from you

  • Details of existing power equipment, including ratings where known
  • Safe access to the distribution board and power equipment area
  • A licensed electrician for any mains or distribution-board work, where required

Important limits

  • No fixed runtime promises; runtime depends on your battery, load, and conditions
  • No brand endorsement is implied by this page
  • Mains wiring and distribution-board changes belong to a qualified electrician
  • Large solar or inverter system design is outside this service unless separately scoped

How it usually works

The final sequence is agreed around the site, access, equipment, and service scope.

  1. 1

    Tell us how often power drops and what must stay connected

  2. 2

    Review your current power equipment and where the Starlink gear will sit

  3. 3

    Agree a practical arrangement for powering the dish and router

  4. 4

    Install or coordinate the wiring and test with a simulated outage where it is safe

Related products

Questions about this service

Will a small UPS keep Starlink running through a long outage?

Not necessarily. Runtime depends on the equipment load and the battery capacity. We help you size expectations rather than guess.

Do I need an inverter or can I use my generator directly?

Both can work. A generator alone often means a brief drop at changeover, which a UPS or inverter in between can smooth out.

Talk through backup power

Contact Skylink with the location, equipment, and requirement for backup power. Online form submission remains unavailable until delivery is configured.

Opens a guide that answers from published Skylink pages. It is not a live generative model.